Tweet
I know the Model A parts houses sell lifting eyes that screw into the spark plug holes, but yesterday I went to a few auto stores and couldn't find any lifting eyes for the modern 14mm spark plug holes. I couldn't even find anything on ebay. I thought they would be fairly common, but I guess everyone uses head bolts to lift the engine.
-
Ran across this, for me really explains things and also shows examples of plug reads.
https://www.briskusa.com/spark_plug_...at_range_chart11-28-2019, 04:26 PM -
If I continuity check from the screw cap to the electrode on a 3X spark plug, should there be any resistance, or at most very low resistance?10-29-2018, 08:21 AM -
I had a easy to use spark plug gap tool it was basically like a pliers with a spark plug gap ring.
I had for maybe 20-30 years but lost it in a move.
Tried a web search but could not find it anyone know if it is still made
Thanks Ed02-19-2020, 01:24 PM -
Hi friends
I bought the 3x champion spark plugs and I need a tool to adjust them, what would it be? Spark plug hexagon is 1- 1/8 inches
Thank you06-10-2018, 08:20 PM -
-
what spark plug wires are you guys running with a miller head? I was told by someone else to get some for a ‘70’s maverick. And they are about 6 inches too long. I asked the guys at napa to try to find some around 19.5 inches long and they just looked at me like I was crazy. So other than buying the ones that I cut to my own length, is there a specific car that anyone knows that I could tell the...12-14-2018, 01:06 PM -
hi can you tell me if these spark plugs are for the Ford A?
Thank you09-07-2018, 05:05 PM -
does a new Champion 3X spark plug need the gap adjusted?
if so, do you use a file or dremmal tool?
Thank You;03-28-2018, 10:16 AM -
this is the engine of my Ford A and I would like to change the spark plugs
I could recommend some, I like the 3x style but I do not know if they are the best
Thank04-06-2018, 12:58 PM -
