Announcement

Collapse
No announcement yet.

Misc Parts Cross Reference

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Misc Parts Cross Reference

    Battery Sizes
    Battery sizes
    6 Volt = Group1
    12 Volt = Group 25

    6V Group 1
    L=8-7/8
    W=6-7/8
    H=8-3/4

    12V Group 25
    L=9
    W=6-7/8
    H=8-3/4


    Electrical:
    Motorcraft DC-1 Condenser
    Motorcraft DP104 Point Set
    Points CS30 Echlin (original style)
    Points CS751 Echlin (new Ford style)
    Condenser FA5 Echlin
    Rotor FA3 Echlin
    Condenser-Mallory Dist MA3 Echlin
    Starter Brushes F502 Echlin
    Spark Plug 561 Champion (Wl6Y)
    Spark Plug 3X Champion (avail on special order)
    Coil (6 volt) IC9 Echlin
    Coil (12 volt) IC14 Echlin (w/built in resistor)
    Generator Cutout CU1 Echlin
    Alternator (12 volt) 71273SE OCA (one wire, internal regulator)
    Battery (6 Vo1t) 7200 Exide
    Battery (8 Volt) 8201 Exide
    Battery (12 Volt) 843578 Exide
    LED Lights
    Tail light - http://www.unitedpacificind.com/storage/file10.pdf
    Marker lamps - http://vehiclelight.com/clli.html
    Light bulbs - http://www.superbrightleds.com
    Bulbs
    Taillight Bulb (6 volt) 63 GE
    Stoplight Bulb (6 volt) 1129 GE
    Taillight Bulb (12 volt) 89 GE
    Stoplight Bulb (12 volt) 1073 GE

    Engine:
    Overhaul Gasket Set FS800C Victor
    Head Gasket Set HS800C Victor
    Intake/Exhaust Gasket MS9800 Victor
    Head Gasket 800C Victor
    Valve (Intake & Exhaust) 211-1558 NAPA Engine
    Valve Spring 212-1001 NAPA Engine
    Valve Seat Insert (Int) 218-8535 NAPA Engine
    Valve Seat Insert (Exh) 218-7535 NAPA Engine
    Piston (Std) 224-2625 NAPA Engine (also avail. .080 over)
    Piston Pin Bushing 223-3316 NAPA Engine
    Cylinder Repair Sleeve 226-8024 NAPA Engine
    Piston Ring Set (std) 506 Perfect Circle
    K&N Air Filters: To fit Air Maze filter kits suppplied by Model A part's vendors: Part E-9257, Round Air Filter, Height: 5.5 in (140 mm), Inside Diameter: 2 in (51 mm), Outside Diameter: 3.5 in (89 mm)
    See:http://www.knfilters.com/search/universal.aspx

    Drive Train:
    Clutch Disk R604 Rayloc
    Pressure Plate CA1524 Rayloc
    Clutch Pilot Bearing 6203-2RSJ NAPA Bearing
    Clutch Release Bearing N1087 NAPA Bearing
    Clutch Alignment Tool 675-1626 Balkamp

    A–7118–A Countershaft Short bearing
    93328 Hyatt
    J24–1248 BCA Federal Mogul
    A–7121–A countershaft long bearing
    94216 Hyatt
    J24–1256 BCA Federal Mogul

    Wheels:
    Front Wheel Inner Bearing 15118 Timken, National
    Front Wheel Inner Race 15250X Timken, National
    Front Wheel Outer Bearing 09074 Timken, National
    Front Wheel Outer Race 09196 Timken, National
    Rear hub seal 416738 National, Timken

    Miscellaneous:
    Gas Cap for 30-31 703-1020 Balkamp
    Fan Belt 25-20426 NAPA Belts & Hoses (also try NAPA #5L430 or 5L440 which is 1" longer)
    Gates cogged belt BX-40
    Dayco 22425
    Consider an industrial cog belt if you have an alternator as it will fit around the smaller pulley better - TR22425)
    Fuel Filter Gasket 730-9510 Balkamp (for glass bowl 30-31)
    Radiator Hose (1-3/4') 611 NAPA Belts & Hose
    Radiator Hose- (2”) 613 NAPA Belts & Hose
    Spare Tire Lock 770-2441 Balkamp

    Bearings (Courtesy of www.jmodlea.com):

    PINION BEARINGS [799000Series]
    Cone (2 used) Ford Number B4211 – Bearing Number 28156 [799085]
    Pinion Double Cup Ford Number B4616 – Bearing Number 28314D, 28314XD [799086]

    Two Tooth Steering Gear Worm Bearing and Cup
    BB3571 bearing Timken
    BB3552 cup Timken

    DIFFERENTIAL BEARINGS
    Cone Ford Number B4221 – Bearing Number 28156 [799085]
    Cup Ford Number B4616 – Bearing Number 28317 [799087]

    MISC. BEARINGS ****** Number}
    GENERATOR SHAFT BEARING(FRONT) {A10093} - 6203 2RS
    3 ~ Tudor's
    Henry Ford said
    "It's all nuts and bolts"


    Mitch's Auto Service ctr

  • #2
    Another list, Many may be duplicated from above!!!

    Battery sizes
    6 Volt = Group1
    12 Volt = Group 25

    6V Group 1
    L=8-7/8
    W=6-7/8
    H=8-3/4

    12V Group 25
    L=9
    W=6-7/8
    H=8-3/4

    Contact Set (HYPERLINK "http://www.napaonline.com/Search/Det...599001+101930+ 50026+2026063"PointsHYPERLINK "http://www.napaonline.com/Search/Det...599001+101930+ 50026+2026063")
    Product Line: Echlin Ignition
    Per Car Qty.: 1
    Compare ECH CS30Price
    Unit 19.99 Each

    Voltage Regulator
    Product Line: Echlin Ignition
    Per Car Qty.: 1
    Compare ECH CU1This part can only be purchased from your local NAPA .

    Distributor Condenser
    Product Line: Echlin Ignition
    Per Car Qty.: 1
    Compare ECH FA5
    Price Unit 7.99 Each

    Distributor Rotor
    Product Line: Echlin Ignition
    Per Car Qty.: 1
    Compare ECH FA3
    Price Unit 11.49 Each

    Ignition Coil
    Product Line: Mileage Plus Electrical
    Per Car Qty.: 1
    Compare MPE IC7SBPrice
    Unit 18.29 Each

    Ignition Coil
    Product Line: Echlin Ignition
    Per Car Qty.: 1
    Compare ECH IC7
    Price Unit 44.99 Each

    Ignition Coil Mounting Bracket
    Product Line: Echlin Ignition
    Per Car Qty.: 1
    Compare ECH ICB15
    Price Unit 7.49 Each

    Generator Brush
    Product Line: Echlin Ignition
    Per Car Qty.: 1
    Compare ECH F403

    Price Unit 2.49 Each

    This is from NoSurf

    Motorcraft DC-1 Condenser
    Motorcraft DP104 Point Set
    Points CS30 Echlin (original style)
    Points CS751 Echlin (new Ford style)
    Condenser FA5 Echlin
    Rotor FA3 Echlin

    This is from 30 Tudor

    Electrical:
    Motorcraft DC-1 Condenser
    Motorcraft DP104 Point Set
    Points CS30 Echlin (original style)
    Points CS751 Echlin (new Ford style)
    Condenser FA5 Echlin
    Rotor FA3 Echlin
    Condenser-Mallory Dist MA3 Echlin
    Starter Brushes F502 Echlin
    Spark Plug 561 Champion (Wl6Y)
    Spark Plug 3X Champion (avail on special order)
    Coil (6 volt) IC9 Echlin
    Coil (12 volt) IC14 Echlin (w/built in resistor)
    Generator Cutout CU1 Echlin
    Alternator (12 volt) 71273SE OCA (one wire, internal regulator)
    Battery (6 Vo1t) 7200 Exide
    Battery (8 Volt) 8201 Exide
    Battery (12 Volt) 843578 Exide
    LED Lights
    Tail light - http://www.unitedpacificind.com/storage/file10.pdf
    Marker lamps - http://vehiclelight.com/clli.html
    Light bulbs - http://www.superbrightleds.com
    Bulbs
    Taillight Bulb (6 volt) 63 GE
    Stoplight Bulb (6 volt) 1129 GE
    Taillight Bulb (12 volt) 89 GE
    Stoplight Bulb (12 volt) 1073 GE

    Rev A to above:
    Useful Electrical Parts info for Model A
    Points: Echlin CS30 (original style)
    Echlin CS751 (New Ford style)
    Echlin DP104 (Modern Style with modifed Upper and Lower Plate)
    Motorcraft DP104
    Condenser: Echlin FA5
    Echlin DC-1 (Modern style)
    Echlin MA3 (Mallory Distributor)
    Rotor: Echlin FA3
    Coil: Echlin IC9 6V
    Echlin IC14 12V
    Spark Plugs: Champion 3X (Original Style available from parts Houses)
    W14 Colder Plug than W16 and Autolite 3076
    W16Y Later Champion
    W18Y Hotter Champion if W16Y burns black
    TT10 Motorcraft

    Starter Brushes: Echlin F502
    Generator Cut Out Echlin CU1
    Fan Belt: Napa 5L430 43"
    Napa 5L440 44"
    Resistor for horn Ohmite RKS2RO when using 6V horn on 12V

    Conversion kit for GM 10SI and 12SI altenators to 1 wire
    Quick Start SE-590


    Engine:
    Overhaul Gasket Set FS800C Victor
    Head Gasket Set HS800C Victor
    Intake/Exhaust Gasket MS9800 Victor
    Head Gasket 800C Victor
    Valve (Intake & Exhaust) 211-1558 NAPA Engine
    Valve Spring 212-1001 NAPA Engine
    Valve Seat Insert (Int) 218-8535 NAPA Engine
    Valve Seat Insert (Exh) 218-7535 NAPA Engine
    Piston (Std) 224-2625 NAPA Engine (also avail. .080 over)
    Piston Pin Bushing 223-3316 NAPA Engine
    Cylinder Repair Sleeve 226-8024 NAPA Engine
    Piston Ring Set (std) 506 Perfect Circle
    K&N Air Filters: To fit Air Maze filter kits suppplied by Model A part's vendors: Part E-9257, Round Air Filter, Height: 5.5 in (140 mm), Inside Diameter: 2 in (51 mm), Outside Diameter: 3.5 in (89 mm)
    See:httpHYPERLINK "http://www.knfilters.com/search/universal.aspx"://www.knfilters.com/search/universal.aspx

    Drive Train:
    Clutch Disk R604 Rayloc
    Pressure Plate CA1524 Rayloc
    Clutch Pilot Bearing 6203-2RSJ NAPA Bearing
    Clutch Release Bearing N1087 NAPA Bearing
    Clutch Alignment Tool 675-1626 Balkamp

    A–7118–A Countershaft Short bearing
    93328 Hyatt
    J24–1248 BCA Federal Mogul
    A–7121–A countershaft long bearing
    94216 Hyatt
    J24–1256 BCA Federal Mogul

    Wheels:
    Front Wheel Inner Bearing 15118 Timken
    Front Wheel Inner Race 15250X Timken
    Front Wheel Outer Bearing 9074 Timken
    Front Wheel Outer Race 9196 Timken

    Miscellaneous:
    Gas Cap for 30-31 703-1020 Balkamp
    Fan Belt 25-20426 NAPA Belts & Hoses (also try NAPA #5L430 or 5L440 which is 1" longer) Consider an industrial cog belt if you have a generator as it will fit around the smaller pully better - TR22425)
    Fuel Filter Gasket 730-9510 Balkamp (for glass bowl 30-31)
    Radiator Hose (1-3/4') 611 NAPA Belts & Hose
    Radiator Hose- (2") 613 NAPA Belts & Hose
    Spare Tire Lock 770-2441 Balkamp

    Bearings (Courtesy of www.jmodlea.coffeecup.com):

    PINION BEARINGS [799000Series]
    Cone (2 used) Ford Number B4211 – Bearing Number 28156 [799085]
    Pinion Double Cup Ford Number B4616 – Bearing Number 28314D, 28314XD [799086]

    DIFFERENTIAL BEARINGS
    Cone Ford Number B4221 – Bearing Number 28156 [799085]
    Cup Ford Number B4616 – Bearing Number 28317 [799087]

    MISC. BEARINGS {Ford Number}
    GENERATOR SHAFT BEARING(FRONT) {A10093} - 6203 2RS

    Two Tooth Steering Gear Worm Bearing and Cup
    ​​​​​​​BB3571 bearing Timken
    BB3552 cup Timken
    3 ~ Tudor's
    Henry Ford said
    "It's all nuts and bolts"


    Mitch's Auto Service ctr

    Comment


    • #3
      Thanks Mitch. Did I ever tell you, you're my hero?

      Comment


      • #4
        Originally posted by thom View Post
        Thanks Mitch. Did I ever tell you, you're my hero?
        And you are mine
        3 ~ Tudor's
        Henry Ford said
        "It's all nuts and bolts"


        Mitch's Auto Service ctr

        Comment


        • #5
          We gotta stop now before somebody says we need to get a room!

          Thanks, really.

          Comment


          • #6
            Timken seems to have long lead times for front wheel bearings and races. What other companies do you guys use?

            Comment


            • #7
              Originally posted by Jhva View Post
              Timken seems to have long lead times for front wheel bearings and races. What other companies do you guys use?
              Check out this thread
              https://www.vintagefordforum.com/for...-wheel-bearing
              3 ~ Tudor's
              Henry Ford said
              "It's all nuts and bolts"


              Mitch's Auto Service ctr

              Comment

              Related Topics

              Collapse

              • plyfor
                Front Inner Wheel Bearing
                by plyfor
                Does anyone know where to buy Bower A1201 replacement inner bearings? The Timken replacement 15118 throat is a little too small to fit my original spindles. The Bower calipers .001 or so more i.d. and slips on. We used to heat ball bearings on a 100watt light bulb but have never tried it with rollers.
                08-18-2020, 12:03 PM
              • Chuck Sea/Tac
                Front generator bearing
                by Chuck Sea/Tac
                What's the front generator bearing. I'm thinking 6203?? With the metric I'd?...
                06-14-2017, 08:42 PM
              • A-Bone
                Model A 12 volt battery
                by A-Bone
                1931 ford complete restoration changing to 12 volt. What is the best group number battery that will give me the best fit. Thanks
                01-19-2021, 02:34 PM
              • Cape Codder
                Timken Outer Front Wheel Bearing P/N
                by Cape Codder
                Does anyone have a Timken OUTER Front Wheel Bearing P/N?...
                08-21-2020, 02:51 PM
              • JKY
                Throwout Bearing
                by JKY
                So we're ready to install a new engine in the 28 closed cab pickup. We checked the throwout bearing and it's not too great. No sense putting an engine over that bearing and having to change it in 6 months or a year. To keep us on track we tried to find one locally. Used the Ford number (A-7580-B) to try and find a cross, came up with a Timken number, no one locally had one. Tired a bearing shop (they...
                10-06-2020, 11:45 AM
              • fmr187
                front inner wheel bearing
                by fmr187
                got some new wheel bearings (Timken) and when I went to put on the inner it wouldn't go all the way onto the spindle. I took the old one and it wouldn't go all the way on either until I rotated it around on the spindle. Then it slid right on nice. The new one isn't doing this. How tight a fit should there be with the bearing and the spindle? Should I put pressure on the new bearing to get it all the...
                02-29-2020, 02:09 PM
              • popsjohn
                Conversion back to 6 volt
                by popsjohn
                I am looking at a 1931 CC Pickup that has been converted to 12 volt. What would be involved in changing it back to stock 6 volt system?
                08-10-2020, 01:57 PM
              • sunnyorm
                6 volt Chargers
                by sunnyorm
                Looking for consensus on good Battery Chargers for 6 volt (mine is Optima)

                I searched using 12 volt charger (which mine is now) on a 6 volt, but am not sure, if it is alright?
                05-06-2018, 11:06 AM
              • plyfor
                12 volt system coil follow up to thread 11-7-17
                by plyfor
                We have a Standard 12 volt internal resistor UC15T coil for another project. It reads 4.6 ohms across the terminals with 2.6 amps to the points. If an alternator puts out approx. 14 volts , the current to the points is approx 3 amps.
                Just want to follow up that this is OK (with stock or modern V8 style points) if we use on a Model A ?
                11-16-2017, 04:57 PM
              • BudP
                Transmission Noise Guidance
                by BudP
                TRANSMISSION NOISE
                FORD MODEL A


                Symptom: Noise from transmission, effected by clutch pedal movement.

                Clutch Throw Out Bearing Noise: high-pitched rubbing noise with only slight
                pressure on clutch.

                Pilot Bearing Noise: high-pitched noise when clutch is fully depressed.

                Noise When Clutch Pedal Depressed:
                -throw out bearing,...
                02-11-2018, 08:38 AM
              Working...
              X