FWIW, a site I stumbled across.
-
You do not have permission to view this gallery.
This gallery has 1 photos. -
3~ Tudor's & 1~ Coupe
Henry Ford said,
"It's all nuts and bolts"
"Start by doing what's necessary; then do what's possible; and suddenly you are doing the impossible."
Mitch's Auto Service ctr -
That is the wiring diagram from the dykes encyclopedia. I posted it over on ahooga under xray.jpg a bunch of years back. I think it was John Brady that added the color coding. You can still get the model a supplement from the dykes manual from the suppliers, or the manual itself off ebay. I have the 1941 edition of the encyclopedia .
Here's Bratton info:
37660_1.jpg
DYKES MANUAL
Part #: 37660
$14.85Last edited by Jim Mason; 02-13-2018, 09:20 PM.Comment
-
That was the diagram I started with when I wrote http://cedarcreekas.org/TechTopics/1...rn_Signals.pdfComment
-
-
-
I would like to build a sub forum for Model T tech info, similar to what we have in the A section. If you have any specialized reference material that we can put there post it to this thread.
So what do ya got?02-08-2018, 07:52 AM -
Hi all,
The restoration continues... does anyone know where I can find a complete vehicle-wide 12-volt wiring diagram? I've been searching all over the web and I've found several parts of the info, but not a complete one and a couple conflict with one another. Any assistance is appreciated. Thanks.
Pat09-06-2017, 08:59 AM -
1926 / 1927 Switch Assembly
Courtesy of Martin Vowell...02-09-2018, 01:14 AM -
Click to enlargeYou do not have permission to view this gallery.
This gallery has 1 photos.05-10-2017, 01:31 PM -
Here is the same info presented in 3 different ways:
Notice:::::: The two wiring diagrams below are pre NOV 29. All cars should be wired as shown above in the first diagram
SEE POST #5 BELOW!!!
...06-27-2017, 01:46 PM -
This article was supplied by Mike V and was copied from the Model A dykes manual
...09-29-2017, 10:01 AM -
I have been told that the Van Pelts and other 1933-36 v8 spark plug wiring diagrams are WRONG. The physical locations of the wire connections are WRONG but will be 90 degrees out of phase.. Spark plug wire should be plugged into the molded numbered sockets regardless of their physical locations on the end plate..
I guess I was the first guy that ever tried to use these diagrams....hard to believe!...04-08-2018, 02:09 PM -
When I started to work on my car I was informed by some of you that my cutout wiring was wrong. Does it look correct now? Both before and after pictures attached. HughYou do not have permission to view this gallery.
This gallery has 2 photos.06-28-2018, 04:23 PM
Comment