Merry Christmas To You and Your Family

[Mitch]

[Beauford]

Merry Christmas buddy! Now come over and align these rear radius rods to match up to bolt hole. LOL

[Mitch]

I told ya not to take that out.

[Beauford]

HAHAHAHA....yeah sure you did. I'll be on a cold garage floor while my kids open presents listening to me cuss.

[Mitch]

Hopefully you get a line up punch for XMAS,,,,, HEHE

[pAAt]

Tis the season to put the wrenches down, enjoy family and friends, and hope Santa will fix that up before he leaves !! Merry Christmas too all !

[Beauford]

I vaguely remember going through this the first time. Merry Merry!

[pAAt]

From our family to yours Beauford, Merry Christmas. Only great days ahead !! If you need a part, Tom and I will be in Tennessee the end of April, Santa never quits. With respect, Pat

[Beauford]

Paat, Merry Christmas to you and yours! I hope to make it down to the workshop! Hope your new year hits on all four cylinders!

[Michael M]

Merry Christmas To Mitch and all on the VFF!

[tbirdtbird]

Indeed, Merry Christmas to the best crowd on the best forum!

[pAAt]

Merry Christmas TBird and family. White Christmas up here yet and plenty of time to jump on the plane to see it !

[Mike V. Florida]

May health and the peace of the season follow you and yours throughout the year.

[DaWizard]

[Curly]

Santa is on his way to the lower 48, he just flew over my house and dropped me a lump of coal!!!

[DaWizard]

Hey, wait a minute, you're in Alaska, it's only 20:38 there, he can't be there already!

[Curly]

He came a little early this year.

[BNCHIEF]

Curly has been really bad this year Santa had to give him extra attention.

[pAAt]

That's fly over country for Santa, right ? Merry Christmas Alaska ! We are eating Halibut from there today and a few shrimp. As you can see I'm not helping with the frying, but I will give it a sample

[slammin]

Merry Christmas to all my fellow VFFers!

[BNCHIEF]

Nice post Mitch and Merry Christmas to all here.

[canadian]

Merry Christmas to all from Newfoundland Canada, enjoy the holidays .

[pAAt]

Canadian, Merry Christmas from down under ! Avatar for Christmas? Pat

[canadian]

hey Pat , I think thats my New Years resolution , cheers

[2manycars]

Merry Christmas to all from eastern Connecticut, where we have a snow storm in progress.

[pAAt]

Safe travels and a Merry Christmas from Minnesota !

[Mickey]

Merry Christmas and may each take advantage of that greatest gift that received by the world on this day.

[Fixitphil]

Merry Christmas Mitch and to all of you VFF'ers!!!!
Phil

[BudP]

[BNCHIEF]

Lest they be forgotten, Nice Bud thanks.

[davew]

And Merry Christmas to you. We have -11 degrees here so staying inside.

[tbirdtbird]

-11, OMG that is beyond cruel.
Let me be the first to extend to you a warm welcome to the great state of Texas. You will love the weather and there are many clubs in this state and tons of Model A activities. In fact the Dallas club has so many tours some of our 400 members actually also belong to other clubs, including a few from OK, just so they can be part of our tours.

And the job opportunities are endless. Toyota just moved their offices from CA to Dallas/Plano (haha wonder why) and the place is like a city unto itself. A zillion jobs there alone.

More than a million people move to Texas every decade; mostly escapees from the north. No income tax, either!

[BNCHIEF]

Texas is a great place to live for sure also great people.

[davew]

It was -18 this morning. I have a niece that lives in Denton. Keeps saying I should retire there. It would be fun to tour year round.

[Mitch]

I'll be heading to the west coast of FL when they put me out to the pasture.

[CarlLaFong]

Merry Christmas. Hopefully, next year, we'll be sitting in an "A"

[DaWizard]

Carl, do you know what you are looking for? We have a club member that is selling a '31 Rumble Coupe.

[CarlLaFong]

A rumble coupe or a sedan, preferably a tudor is what I am looking for. I am on a budget and cannot consider a high point car. A 20 foot, driver is what I envision. Less than 10K. Want something I can drive and tinker with at the same time. Just a plain old stocker, no modern "upgrades", if possible

[BNCHIEF]

Carl nice T.

[TOBKOB]

DSCN1108 - Copy.JPG Merry Christmas.

TOB

[BudP]

Christmas day drawing to a close. Time to move on down the track.

[H. L. Chauvin]

Wife & I are in -12*F in "Old" Quebec City, Canada this week since December 23 for Christmas. All it takes is proper winter clothing, a minor change in attitude, & just get out to join the tourists.

We drove here for our honeymoon years ago in the fall, & returned by plane subsequently quite often, sometimes with our children and grandchildren.

Quite a few waitresses and bar tenders here recognize us as soon as we walk in and smile to greet us.

For New Years, just wishing we all may continue to try to think young in 2018 ..... maintain our health, and continue to enjoy maintaining our Model A's.

[Mitch]

Henry have a great time, Merry Christmas and a Happy New Year.

It's good to see you posting your expertise

[BNCHIEF]

I wish you many and your wife many years Henry, as well as appreciate all you do here for us.

[H. L. Chauvin]

Thanks. Also to Mr. BNCHIEF, the former sincere owner of my 1930 Briggs wood bodied Town sedan told me prior to this car being stored indoors for 30 years, the original owner he was told was a widow from an arid region in Kansas who never left this car parked out of doors.

FWIW: Never a good idea to buy any wood bodied Model A known to have been parked out of doors in a humid area for any length of time ..... because of side windows possibly leaking, appears wood framed doors would easily rot quickly ..... possible roof leak, appears entire wood body below roof leak is at risk.

[CarlG]

We are in Seattle for the next few days. They had snow on Christmas day, threw everything for a loop. Nice and clear when we left Anchorage Christmas morning! Go figure!

[Tom Wesenberg]

A rumble coupe or a sedan, preferably a tudor is what I am looking for. I am on a budget and cannot consider a high point car. A 20 foot, driver is what I envision. Less than 10K. Want something I can drive and tinker with at the same time. Just a plain old stocker, no modern "upgrades", if possible

I'll have to check the want ads in our club, as I think there is at least one Tudor in your budget.

[CarlLaFong]

I'll have to check the want ads in our club, as I think there is at least one Tudor in your budget.

A trip to Minnesota kinda blows my margin

[KenCoupe]

Here is SoCal we don't have white Christmas. On Christmas day it was 75 degrees and today about 80 degrees.I hope all in the North and East keep warm and safe.

[DaWizard]

Hey KenCoupe, WELCOME to the VFF!!

See ya Saturday at the Horseless Carriage Club Holiday Excursion?

If you don't know about it, PM me.

[CarlLaFong]

I was hoping to make that event, at the invitation of DaWizard, but I forgot that I have a funeral to attend. When I was young, it was weddings, now it's funerals

[KenCoupe]

Thanks for the invitation. I am recovering from a broken wrist and not driving my Model A right now. Perhaps when it has healed, I can join in.

[DaWizard]

Well Ken, for this one you will need to wait til next Dec as this only happens once a year. But I will try to keep you informed of the happenings around So Cal. Get well soon.