I saw this on Facebook “COE and one tons” Typically I do not like modified A’s, however this one is an exception that was tastefully done.
-
You do not have permission to view this gallery.
This gallery has 1 photos. -
I saw one on craigslist that was a pickup made from a 31 SW fordor, it is an unusual looking truck.You do not have permission to view this gallery.
This gallery has 1 photos. -
Its hard to top Edsel Ford and Joe Galamb in my opinion.Comment
-
This one is my favorite. I tried to buy it, but he would not sell. My idea of a perfect model A pickup. 29 town sedan with a late 31 cab back and roof grafted on.You do not have permission to view this gallery.
This gallery has 4 photos.Comment
-
Here is Canadians Car / Truck,,, he did a nice job
https://www.vintagefordforum.com/for...43289-cartruck
3~ Tudor's & 1~ Coupe
Henry Ford said,
"It's all nuts and bolts"
"Start by doing what's necessary; then do what's possible; and suddenly you are doing the impossible."
Mitch's Auto Service ctrComment
-
Here's Ron Kelley's truck.You do not have permission to view this gallery.
This gallery has 2 photos.Alaskan A's
Antique Auto Mushers of Alaska
Model A Ford Club of America
Model A Restorers Club
Antique Automobile Club of America
Mullins Owners ClubComment
-
One more picture of Ron Kelly’s truck.You do not have permission to view this gallery.
This gallery has 1 photos.Comment
-
Anyone know what the weight of an AA chassis (dual wheel) and cab would be? No box on back.
Just looking for a ball park figure.
We have a gravel dump box truck that we are trying to get licensed. Jeff10-13-2019, 05:44 PM -
Anyone have any idea on what the body on this Model A could be. It's located on the Cape may go take a look at it next week?
Looks to have a commercial Cowl
Ford Model A pickup - cars & trucks - by owner - vehicle automotive... (craigslist.org)...07-03-2021, 10:06 AM -
Can anyone pull a measurement for me? I have a 1930 AA with a round cab and need the measurement from the center of the cowl post bolt to the center of the first seat rivet, want to double check my measurement before I anchor stuff together. Thanks!...03-31-2021, 10:26 PM -
What month did Ford introduce the Closed Cab body with a pickup box?
Thanks.
Pluck02-25-2018, 11:17 PM -
Any 1928-1931 Open Cab Pickup owners out there?
Thanks.
Pluck11-28-2020, 10:26 AM -
Hi,
I have been lurking for a few weeks trying to learn as much as I can. I recently purchased my grandfather's '31 AA. He purchased it very early 80's and he sold it in '11 when alzheimer's started to set in. Well yesterday I was able to purchase it back. Growing up, I'm 33, we would take it to Walcott Iowa every year for the Trucker's Jamboree truck show. I have a lot of great memories...01-27-2019, 02:06 AM -
I am needing subrails for a late 31 Bud closed cab pickup.
Does the Bud cab use the same subrails as the other 30-31 closed cabs.
The vendors do not show any subrails for a 30-31 cab, they say to cut down tudor sedan subrails, what is involved in cutting down the subrails and how do they fit compared to the original subrails.
Is anyone making 30-31 closed cab subrails, or planning...03-17-2021, 08:56 PM -
Starting a new project. This was Grandpas model A truck that he used here on the farm. He had cut it down and made a tractor to pull the manure spreader with it. One rear tire was a tractor tread when I tore it down. It’s pretty rough but it will drive again someday! I have a different frame and truck bed here for it, the back of the cab and doors are pretty rough and are going to test my body work...03-16-2021, 11:01 PM
-
I have searched and couldn't find what I was looking for but I might have missed it.
Is there a tutorial/step by step post here or somewhere else about removing a truck cab from the frame? I am talking from a running or fully put together vehicle? At some point I want/need to verify the frame number on my truck with the title. The engine is a replaced engine and dates to 1929 vs the...05-05-2019, 10:46 AM -
Contained in the Indianapolis Service Letter of May 25, 1928 was the following statement about the 1928 Open Cab body: "The Open Cab is now interchangable on the "A" and "AA" chassis".
Besides "spliting" the Open Cab body and the Pickup body into two seperate units or body styles...Just what else did Ford do to the Open Cab body to make it "interchangable"...07-22-2018, 02:09 PM
Comment