The VFF may slow down or act funny around 4:40 est for a quick update
-
3~ Tudor's & 1~ Coupe
Henry Ford said,
"It's all nuts and bolts"
"Start by doing what's necessary; then do what's possible; and suddenly you are doing the impossible."
Mitch's Auto Service ctr -
Oh, is that like when it shut down last night around 9pm Pacific?
All this updating, we should be getting more neat features.You wana look waaay far up da road and plan yer route because the brakes are far more of a suggestion than a command! -
Seems like I also slow down around 4:40 too!
Comment
-
3~ Tudor's & 1~ Coupe
Henry Ford said,
"It's all nuts and bolts"
"Start by doing what's necessary; then do what's possible; and suddenly you are doing the impossible."
Mitch's Auto Service ctrComment
-
You can now upload a larger picture file without resizing it..3~ Tudor's & 1~ Coupe
Henry Ford said,
"It's all nuts and bolts"
"Start by doing what's necessary; then do what's possible; and suddenly you are doing the impossible."
Mitch's Auto Service ctrComment
-
There is an issue that is happening daily around 12:30 a/m EST where the site slows to a stop for about an hour.. That problem is being worked on FYI3~ Tudor's & 1~ Coupe
Henry Ford said,
"It's all nuts and bolts"
"Start by doing what's necessary; then do what's possible; and suddenly you are doing the impossible."
Mitch's Auto Service ctrComment
-
Thanks, I thought I crashed the site asking last nights question. Was not even sure til this morning that it even posted. Rod"Much of the social history of the Western world, over the past three decades, has been a history of replacing what worked with what sounded good." Thomas SowellComment
-
The Dog.gif "dog")
sed he DIDN'T do it.png "eek")
Comment
-
Easy uploads is a BIG deal! Thanks Mitch! Here is a random test shot.Comment
-
And I bet you believed him.Originally posted by BILL WILLIAMSON View PostThe Dog sed he DIDN'T do itComment
-
Ray,
Sitting in my wheel chair in the hall, heard the Dog "skitter" on the slick kitchen floor. He came to me holding his L/F foot up & folded back & hopping on the other leg! He laid down & I gave him a POOR BOY, POOR BOY! He slowly got up & walked to the bedroom, holding the R/F foot folded back. Finally convinced him he COULD jump up on the bed.---"Make yourself a bed & rest until the foot feels better"---Half hour later as I was taking a "P", heard him outside BARKING!---NEVER even a limp, after that!---And you ask if I can TRUST my Dog??--LOL
Bill SuckerComment
-
The new pic uploading spec is about 4580 X 4580 give or take. This will pretty much allow pictures to be uploaded directly to the site without having to resize them.
I was able to post a pic with my new iphone 10 X model directly...
This is a great improvement3~ Tudor's & 1~ Coupe
Henry Ford said,
"It's all nuts and bolts"
"Start by doing what's necessary; then do what's possible; and suddenly you are doing the impossible."
Mitch's Auto Service ctrComment
-
Testing pic.You do not have permission to view this gallery.
This gallery has 1 photos."Much of the social history of the Western world, over the past three decades, has been a history of replacing what worked with what sounded good." Thomas SowellComment
.png){kind=spacer}
-
A few asked for an update when we returned home. Total miles 2622, total cost $2000, Mitch, I think it would have been cheaper to pay the freight rather than come pick up that rear axle. We hit the Smoky mountains at the hottest part of the day. The two sister cars were spraying coolant all over their windshields on every climb. Problem child is still consuming water even with new head gasket....07-03-2018, 09:38 AM -
For those living in Minnesota or nearby, I just got an email letting me know the Ford Tri Motor is coming to St Cloud and Rochester in July.
If you've never been on this plane, it's well worth the price of the ride.
July 6-9, 2017 St. Cloud, MN - St. Cloud Regional Airport
Field Location: TBD
Aircraft: Liberty Ford 5-AT-B
...05-26-2017, 09:54 PM -
I was invited to join this forum. I probably know some of you from other places, but some here may not be familiar with my work.
Tod05-25-2018, 01:57 PM -
Well, I guess this could be posted in the regular area, but since I didn't really know, I post here.
Anyone know the rear main diameter at stock size?
Seems I remember something about 1.585 but not sure.
TIA09-02-2017, 02:41 PM -
I will preface this by saying that we have the greatest Model Aers in the Diamond Tread chapter of MAFCA!
One of our working members was to have a weeks vacation so one of the others suggests we have an outing to commemorate the vacation. After 2 weeks of intense planning it was finalized and set for Mar 26th. We left from one of the clubs favorite starting spots, Der Weenerschnitzle...You do not have permission to view this gallery.
This gallery has 35 photos.03-30-2018, 11:55 PM -
All the parts for the conversion are available at Home Depot. Also notice the highly detailed engine compartment..gif "rofl")
You do not have permission to view this gallery.
This gallery has 1 photos.07-17-2018, 05:08 PM -
since many of us are getting used to a new STYLE format, i think it might be a good idea to post newly found navigation tips to this main area for quick viewing. I will also be copying these threads to the support forum sticky where many are already posted...
if anyone notices something to share with the group that has not been posted feel free to start a new thread on it. Take a look at the...06-05-2017, 07:56 AM
Comment