Announcement

Collapse
No announcement yet.

Compete Seat

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Compete Seat

    any companies sell a complete Roadster P/U seat and just not the springs. Looking just for black vinyl...Also. Should I paint all areas in the interior? Even areas covered buy panels? Never painted the inside of a bare car.

  • #2
    i would not leave it bare metal.... i epoxy primed the interior areas,,, JMO
    3 ~ Tudor's
    Henry Ford said
    "It's all nuts and bolts"


    Mitch's Auto Service ctr

    Comment


    • #3
      The interior of my 29 Tudor has a lot of body color sprayed all over inside, and this is from the factory.

      As Mitch said, leave no bare metal.

      Comment


      • #4
        Bare metal under the side windows = rust out

        Comment


        • #5
          Mitch i epoxy primered all the inside of any car I do especially with wood next to metal.

          Comment


          • #6
            So hitting the body wood is ok?

            Comment


            • #7
              Originally posted by Beauford View Post
              So hitting the body wood is ok?
              yes who sees it....
              3 ~ Tudor's
              Henry Ford said
              "It's all nuts and bolts"


              Mitch's Auto Service ctr

              Comment


              • #8
                The next guy restoring it in 100 years. Lol

                Comment


                • #9
                  LeBaron-Bonney used to sell covered seat springs, give them a call. 800-221-5408

                  Bob

                  Comment


                  • #10
                    Thanks bob. I shutter for them to give me a price. Lol

                    Comment

                    Related Topics

                    Collapse

                    • Electricman8
                      Interior problem
                      by Electricman8
                      I have a 1931 Model A Ford Roadster I’m trying to install the interior wood pieces I purchased from Snyder’s There are 12 precut pieces of wood three on each side by door jam to mount side panels on 5 pieces to construct front seat support along with two metal pieces Which also isolates the rumble seat I’m looking for som sort of view on how to finish this off any help
                      11-02-2020, 02:08 PM
                    • JohnB15632
                      Front Seat Cushions
                      by JohnB15632
                      Can anyone out there is 31 SW 4D TS land be able to tell me how the upholstered back springs attach to the metal seat carriage?

                      Thanks,...
                      You do not have permission to view this gallery.
                      This gallery has 1 photos.
                      07-31-2020, 02:24 PM
                    • Brent
                      Winter Project - Interior
                      by Brent
                      Hi all. After test fitting and aligning doors, fenders, etc. I began prepping and priming sheet metal for paint. For now, I have fenders, running boards and hood in primer. With the onset of winter I decided to focus on the top/interior before beginning any paint prep on the body. Starting with the top, I know I need to replace at least 1 bow. The passenger side header shows a little rot so I'm...
                      You do not have permission to view this gallery.
                      This gallery has 4 photos.
                      12-03-2018, 12:12 PM
                    • greenhornet
                      Model A roadster floor pans for rumble seat.
                      by greenhornet
                      I have a lot of other issues to straighten out before I deal with the rumble seat floor on my recently acquired '31 roadster but wonder if I should bother at all.I don't think body has ever been removed from frame and floor is pretty solid under driver seat and even the floor where your feet go in rumble area. Someone replaced the rumble seat platform with a galvanized sheet metal piece that is really...
                      10-02-2018, 09:54 AM
                    • DaWizard
                      Wheezer's working upholstery
                      by DaWizard
                      Well, since I posted the pictures in the Morning thread I thought this would be a better place to share this.

                      Over the last couple of weeks I have been having some new seat covers made for Wheezer since the seat covers that came over the original upholstery was beginning to seriously break down due to my daily usage.

                      Well, here are the pictures promised of some of the original
                      ...
                      You do not have permission to view this gallery.
                      This gallery has 6 photos.
                      11-03-2019, 02:39 PM
                    • greenhornet
                      Rumble seat cushion anchoring.
                      by greenhornet
                      I think my rumble seat cushions are pretty good originals not a reproduction but the rumble seat floor is a fabrication. The car was restored in the fifties and sixties probably before reroductions were made for seat springs and floor. My question is this how does the rumble seat cushion on a '31 roadster fasten to the floor.I think I see holes in the repro floor platform and my seat spring has two...
                      01-15-2019, 09:11 PM
                    • Brent
                      Picking up where Dad left off
                      by Brent
                      So, I've gotten the sheet metal including the doors, cowl, hood, etc. fitting pretty well. In general, I believe the sheet metal is in pretty good shape. Part of the car has been painted black lacquer and part of it is in spotty primer and filler...this was done probably 20 years ago by my dad. As I pick up the body work again, I was hoping for some help with my plan of attack.

                      First,...
                      10-13-2017, 04:46 PM
                    • Bill G
                      My new project - full interior.
                      by Bill G
                      The last couple years was the exterior and the drive train. Now it's time for the interior. Yesterday I placed my order with Mike at Classtique. Needless to say, I will have a couple months to ready everything for the new upholstery and everything else. This evening I removed the upholstery from the back seat (29 Tudor). This promises to be a project indeed. I read with great interest the series...
                      You do not have permission to view this gallery.
                      This gallery has 6 photos.
                      01-15-2020, 12:37 AM
                    • Tony Hillyard
                      Interior trim
                      by Tony Hillyard
                      Good evening everyone,

                      My 1928 Tudor Sedan is in need of new seat covers. I have asked Le Baron Bonney but they don't seem interested in sending me any colour samples or prices. Does anyone know of a supplier that is interested in selling me some?...
                      03-25-2019, 02:50 PM
                    • Bill G
                      Interior - Getting there
                      by Bill G
                      I mentioned in a previous post that I was nearly done and I made progress towards that goal today. I got my interior kit weeks ago. Actually a month and a half ago. I have never done an interior and a local upholster pitched me on how many old cars he has done so I was going to have him do the whole thing. I delivered the seats and the instructions from Classtique and he sat in that for weeks, and...
                      You do not have permission to view this gallery.
                      This gallery has 10 photos.
                      06-15-2020, 03:21 AM
                    Working...
                    X