Announcement

Collapse
No announcement yet.

I need a fan belt 1930 A

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • I need a fan belt 1930 A

    im in Canada and have near by. Napa store . Anyone know the size ? Or part number?
    mine has separated for some reason ,only 1500 miles..on a new one from Brattons.

    fredski

  • #2
    Post #6
    https://www.vintagefordforum.com/for...-belt-problems BX40 gates number
    3 ~ Tudor's
    Henry Ford said
    "It's all nuts and bolts"


    Mitch's Auto Service ctr

    Comment


    • CarlG
      CarlG commented
      Editing a comment
      BX40 is 40" in length. If that is too short for your application, try a BX42 (42" length).

  • #3
    Dont forget to look at your birthday thread , there is a gift for u!!!
    3 ~ Tudor's
    Henry Ford said
    "It's all nuts and bolts"


    Mitch's Auto Service ctr

    Comment


    • #4
      Originally posted by Mitch View Post
      And this is compatible with original generator? I don't have an alternator.

      thanks. For your gates number.

      Comment


      • Mitch
        Mitch commented
        Editing a comment
        NAPA 5l440

    • #5

      Electrical:
      Motorcraft DC-1 Condenser
      Motorcraft DP104 Point Set
      Points CS30 Echlin (original style)
      Points CS751 Echlin (new Ford style)
      Condenser FA5 Echlin
      Rotor FA3 Echlin
      Condenser-Mallory Dist MA3 Echlin
      Starter Brushes F502 Echlin
      Spark Plug 561 Champion (Wl6Y)
      Spark Plug 3X Champion (avail on special order)
      Coil (6 volt) IC9 Echlin
      Coil (12 volt) IC14 Echlin (w/built in resistor)
      Generator Cutout CU1 Echlin
      Alternator (12 volt) 71273SE OCA (one wire, internal regulator)
      Battery (6 Vo1t) 7200 Exide
      Battery (8 Volt) 8201 Exide
      Battery (12 Volt) 843578 Exide
      LED Lights
      Tail light - http://www.unitedpacificind.com/storage/file10.pdf
      Marker lamps - http://vehiclelight.com/clli.html
      Light bulbs - http://www.superbrightleds.com
      Bulbs
      Taillight Bulb (6 volt) 63 GE
      Stoplight Bulb (6 volt) 1129 GE
      Taillight Bulb (12 volt) 89 GE
      Stoplight Bulb (12 volt) 1073 GE

      Engine:
      Overhaul Gasket Set FS800C Victor
      Head Gasket Set HS800C Victor
      Intake/Exhaust Gasket MS9800 Victor
      Head Gasket 800C Victor
      Valve (Intake & Exhaust) 211-1558 NAPA Engine
      Valve Spring 212-1001 NAPA Engine
      Valve Seat Insert (Int) 218-8535 NAPA Engine
      Valve Seat Insert (Exh) 218-7535 NAPA Engine
      Piston (Std) 224-2625 NAPA Engine (also avail. .080 over)
      Piston Pin Bushing 223-3316 NAPA Engine
      Cylinder Repair Sleeve 226-8024 NAPA Engine
      Piston Ring Set (std) 506 Perfect Circle
      K&N Air Filters: To fit Air Maze filter kits suppplied by Model A part's vendors: Part E-9257, Round Air Filter, Height: 5.5 in (140 mm), Inside Diameter: 2 in (51 mm), Outside Diameter: 3.5 in (89 mm)
      See:http://www.knfilters.com/search/universal.aspx

      Drive Train:
      Clutch Disk R604 Rayloc
      Pressure Plate CA1524 Rayloc
      Clutch Pilot Bearing 6203-2RSJ NAPA Bearing
      Clutch Release Bearing N1087 NAPA Bearing
      Clutch Alignment Tool 675-1626 Balkamp

      Wheels:
      Front Wheel Inner Bearing 15118 Timken
      Front Wheel Inner Race 15250X Timken
      Front Wheel Outer Bearing 9074 Timken
      Front Wheel Outer Race 9196 Timken

      Miscellaneous:
      Gas Cap for 30-31 703-1020 Balkamp
      Fan Belt 25-20426 NAPA Belts & Hoses (also try NAPA #5L430 or 5L440 which is 1" longer) Consider an industrial cog belt if you have a generator as it will fit around the smaller pully better - TR22425)
      Fuel Filter Gasket 730-9510 Balkamp (for glass bowl 30-31)
      Radiator Hose (1-3/4') 611 NAPA Belts & Hose
      Radiator Hose- (2”) 613 NAPA Belts & Hose
      Spare Tire Lock 770-2441 Balkamp

      Bearings (Courtesy of www.jmodlea.com):

      PINION BEARINGS [799000Series]
      Cone (2 used) Ford Number B4211 – Bearing Number 28156 [799085]
      Pinion Double Cup Ford Number B4616 – Bearing Number 28314D, 28314XD [799086]

      DIFFERENTIAL BEARINGS
      Cone Ford Number B4221 – Bearing Number 28156 [799085]
      Cup Ford Number B4616 – Bearing Number 28317 [799087]

      MISC. BEARINGS ****** Number}
      GENERATOR SHAFT BEARING(FRONT) {A10093} - 6203 2RS
      3 ~ Tudor's
      Henry Ford said
      "It's all nuts and bolts"


      Mitch's Auto Service ctr

      Comment


      • #6
        Mitch, talk with napa and ask for $ then put napa's part numbers on a sticky :-)

        Comment


        • Mitch
          Mitch commented
          Editing a comment
          Good idea!

      • #7
        Compared to other brands I have acquired recently, the Gates fit better in the groove of my new pulleys plus they have have more cogs per length allowing the belt to bend easier.

        Comment


        • #8
          I bought my fan belt from Bratton's 20 years ago and it still looks like new.
          I wonder what changed for you to only get 1500 miles?
          They don't need to be very tight when you use a generator and stock 2 blade fan.

          Comment

          Related Topics

          Collapse

          • Roadster Rich
            Fan belt
            by Roadster Rich
            I am trapped with one car in Florida (with my Les Andrews Red Book) and one in Georgia. I think that my question would be answered with the book. I am working on the one in Georgia and need to buy a fan belt. Can anyone tell me the size and if I can just get this at an auto parts store?
            06-21-2017, 11:11 AM
          • Dennis
            Fan belt problems
            by Dennis
            Anybody run a fan belt that is not wrapped or a cogged belt. Mine developed a squeak that wasn't consistent with valve train noise nor crankshaft or rods.I have all three fan pulley, crankshaft, and alternator new with about 1500 miles on them. They look new. I never have had luck with the wrapped belts. Any suggestions?...
            08-06-2017, 12:20 AM
          • Bill in NJ
            Fan Belt
            by Bill in NJ
            Is it possible to buy one from a local auto parts store ? Maybe a part # etc ? Thanks in advance !!
            05-13-2018, 01:08 PM
          • BILL WILLIAMSON
            EVOLUTION OF THE FAN BELT
            by BILL WILLIAMSON
            Thought we might talk about the change from the FLAT Model T belt, to the "V" type belt. START THINKING!!!
            07-10-2017, 01:49 PM
          • Tom Wesenberg
            Thoughts on 1930 Blindback Sedan For Sale
            by Tom Wesenberg
            This car sure looks nice in the pictures. One thing I noticed right away is the belt riding a bit low in the pulleys. Normally the correct belt will ride higher in the aluminum fan. The seller mentions the belt slips at higher speed, and I'd try another belt.

            https://www.ebay.com/itm/17363359667...MakeTrack=true...
            11-10-2018, 03:41 PM
          • my1931tudor
            Driving with fan belt off
            by my1931tudor
            Lets say i wanted to check vibration of the fan blade and want to drive my 30 coupe with out the belt in the pulleys.
            Do i leave the generator wired up and just take off the belt and will the generator motor while i drive it ,
            Do i un-wire the generator so it wont motor ?
            What is the proper way to do this?
            6V positive ground long style generator.
            09-09-2018, 02:48 PM
          • canadian
            alternator pulley
            by canadian
            non authentic . But would anyone have approx diameter and width of a pulley to use on a GM Alternator. I can order one from vendor but because I am on the ass hole of the planet its 3 weeks delivery , just wondering if guys are using a pulley from some other application that I can get locally. thanks
            04-10-2018, 08:39 AM
          • davew
            Generator-water pump alignment
            by davew
            So, replaced radiator with new bergs, replaced water pump with Rupert extreme leak less, replaced 4 blade fan with new two blade fan. Hooked everything up, started car and noticed fan belt wobbleing on far side. Took a straight edge and it seems that the pulleys are about 1/8 or so out of alignment.. Didn't take the generator off just loosened it so assuming the fan pulley is the problem. It's on...
            08-05-2018, 06:52 PM
          • Brian in Wheeling
            Alternator and amp gauge and headlights
            by Brian in Wheeling
            I have what I believe is a 30 amp alt. I also have the higher CP standard bulbs in headlights ( 50/30)? When on - they peg the ampmeter to very near full discharge. Belt is tight. Something wrong?

            Brian
            10-18-2017, 07:17 PM
          • sideline
            Engine number
            by sideline
            My engine number, A3691765, appears to be June 1930. Could someone please confirm this for me?
            For what it’s worth this is also the VIN on the title.
            10-02-2018, 04:16 PM
          Working...
          X