Beauford

pAAt

Senior Member

Join Date: Jun 2017

Posts: 5736

Location: Don't know, there's no reception :)
- Share
#1

Beauford

08-28-2017, 09:51 PM

I have a couple pictures I took when I mocked up the bed wood that shows the bolts (3 on each side) that attach the bed/wood to the frame. All the bolts are in the wood holes, but only 3 are to attach the bed/wood to the frame (Z bracket, frame bolt (middle bolt) and rear crossmember end). The rear bolt attaches the bed to the wood and the second to the front bolt attaches the bed to the wood. I think you can see where each bolt goes OK

Pictures and written text by a friend !!! Hope this helps, Pat

You do not have permission to view this gallery.
This gallery has 2 photos.

Model A's and of course the famous AA's
Tags: None

Top

Bottom
Beauford

Senior Member

Join Date: May 2017

Posts: 1112

Location: VA
- Share
#2

08-29-2017, 01:10 AM

Thanks buddy!! No I have to put on my garage socks and have a look-see!!
Top

Bottom
Comment
Beauford

Senior Member

Join Date: May 2017

Posts: 1112

Location: VA
- Share
#3

08-29-2017, 06:56 PM

Thanks ole boy! Photos worked best for me! That bed aint going nowhere now!!!
Top

Bottom
Comment
1 - 4

4 comments

#3.1

pAAt commented

08-29-2017, 09:10 PM

Editing a comment

Thanks to Rusty from Mn. a good ole chap. I'm just the messenger Beauford ! Get that thing going so you can treat your kids to some memories.

Top

Bottom

#3.2

Beauford commented

08-29-2017, 09:55 PM

Editing a comment

If gaslight would ever get my front fenders to me I might be able to get her tagged!!

Top

Bottom

#3.3

pAAt commented

08-29-2017, 10:06 PM

Editing a comment

Hey, I'm more excited about you getting it going than you are !! Maybe not but close

Top

Bottom

#3.4

Beauford commented

08-29-2017, 11:04 PM

Editing a comment

It's going to be great! I will just be sad when I'm done. It really is fun to learn the ole A. My back up hobby is relic hunting (metal detecting) for Civil War artifacts. This truck is going to be great to drive up to people to get permission to hunt their land!

Top

Bottom

Previous template Next

Pickup Box Info.

by pAAt

I have a couple pictures I took when I mocked up the bed wood that shows the bolts (3 on each side) that attach the bed/wood to the frame. All the bolts are in the wood holes, but only 3 are to attach the bed/wood to the frame (Z bracket, frame bolt (middle bolt) and rear crossmember end). The rear bolt attaches the bed to the wood and the second to the front bolt attaches the bed to the wood. I think...
You do not have permission to view this gallery.
This gallery has 2 photos.
- Channel: Model A Forum
08-29-2017, 09:00 AM
Replacing Pickup Bed Wood

by AL in NY

I would like to replace my pickup's bed wood but I'm not sure if you have to remove the pickup box from the truck to do it. Any help would be greatly appreciated....
- Channel: Model A Forum
07-23-2020, 09:48 AM
BED PAINT QUESTION

by Art Ebeling

How is the underside of the bed painted on a 1936 Pickup.? I have a new Mac Hills bed that has the steel floor with the wood subfloor. Does the wood get painted on the underside or is it left unfinished with only the steel subframe painted? Art
- Channel: Early V-8 Forum
08-26-2022, 07:49 AM
Show bed

by Jamey E

Has anybody ever used a “show bed” kit?
These are a false wood kit that installs over your factory steel floor. If so, how easy was it to install & do you like the look/finish??
- Channel: Late V-8 Forum
08-31-2020, 09:39 PM
Tudor Top Wood

by Brent

Hey guys! When installing the right and left side header rails, I noticed that the rails are only 1-1/2" wide at the header bracket. Since these are installed using 2" bolts, the bolts protrude on the exterior of the board and push out on the sheet metal. Has anyone ran into this before? Did I get a couple of bad rails?

Thanks,
Brent...
You do not have permission to view this gallery.
This gallery has 2 photos.
- Channel: Model A Forum
04-06-2021, 10:01 AM
Bolt Removal - looking for suggestions

by Soapy

I have an unusual set of bolts to remove. They lock the boards on my stake truck in place. Where there would have been a head, there is a u-shaped end that hooks over a matching piece which is riveted to the wood. The bolts go through holes in the bed and through a short piece of pipe that is welded to the stake pocket. Obviously, I have a number of options. I can't just attempt to turn the bolt,...
- Channel: Late V-8 Forum
03-04-2021, 04:09 PM
Wood replacement in Fordor

by Cape Codder

Can someone who has replaced wood in a Fordor tell me if the CENTER door post has either a bolt or screw to attach it to the wood above the doors? If either can they be removed from the inside of car or........................?
- Channel: Model A Forum
07-23-2019, 05:43 PM
Roof wood treatment

by emac

I bought a wood kit for my 30 CCPU roof. The way the previous owner had the interior, a lot of this wood was visible. No headliner. My plan was to stain the wood with the same stain as the bed wood and add a coat or two of spar varnish. Any thoughts on this?...
- Channel: Model A Forum
12-20-2020, 10:46 AM
Body/Bed Mounting

by Beauford

Any drawings out there on how to mount '29 Roadster P/U? I have some sort of splash guard as well that goes between cab and bed that I don't see the purpose.
- Channel: Model A Forum
06-11-2017, 08:18 AM
I have a weight problem....

by Denis4x4

.....with my ‘29 CCPU. Took it across the scales and it came in at 2540 #. Looked at the MAFCA and MARC charts and the only thing in the 2500# range is the town car and Fordor. No rear fenders, but a 6-1/2” cab extension. I can’t help but think that redwood bed weighs far more than a steel bed. There is a CRAGAR head and a pair of CJ-7 seats. On the other hand, tube headers and aluminum...
You do not have permission to view this gallery.
This gallery has 1 photos.
- Channel: Model A Forum
07-27-2019, 06:13 PM

Our VFF is sponsoring the 2023 MARC Nat'l

Announcement

Beauford

Comment

Comment

Related Topics

Unconfigured Ad Widget