PLEASE READ BEFORE POSTING YOUR EVENT

This is a sticky topic.

Mitch

Administrator

Join Date: Apr 2017

Posts: 28708

Location: Bucks County, PA
- Share
#1

PLEASE READ BEFORE POSTING YOUR EVENT

09-06-2017, 08:05 PM

When posting a new event please simultaneously add it to the VFF events module by clicking the icon pictured below before posting it. If you post it first the events icon will disappear, so just delete the post and try again

Fill out the appropriate information in the box.

This will log it into the events calendar and the upcoming events area on the home page.
If you need assistance just ask
Thank you

IMG_7309.PNG

3~ Tudor's & 1~ Coupe
Henry Ford said,
"It's all nuts and bolts"
"Start by doing what's necessary; then do what's possible; and suddenly you are doing the impossible."
Mitch's Auto Service ctr
Tags: None

Stuck

Top

Bottom
Mitch

Administrator

Join Date: Apr 2017

Posts: 28708

Location: Bucks County, PA
- Share
#2

10-15-2017, 11:27 AM

After bringing up the event module click the all day box if your event is multiple days for an ending time as shown here...

Then type in the event location in the bottom box

IMG_7798.PNG

3~ Tudor's & 1~ Coupe
Henry Ford said,
"It's all nuts and bolts"
"Start by doing what's necessary; then do what's possible; and suddenly you are doing the impossible."
Mitch's Auto Service ctr
Top

Bottom
Comment
1 - 2

2 comments

#2.1

BNCHIEF commented

10-15-2017, 05:58 PM

Editing a comment

AAAAAAAAAAAAh Bach.

Top

Bottom

#2.2

DaWizard commented

11-26-2017, 11:22 AM

Editing a comment

Someone watches waaaaaay too much M*A*S*H

Top

Bottom
Mitch

Administrator

Join Date: Apr 2017

Posts: 28708

Location: Bucks County, PA
- Share
#3

11-26-2017, 08:00 AM

We have now added google maps to the events module. Just type in the exact address in the location box

3~ Tudor's & 1~ Coupe
Henry Ford said,
"It's all nuts and bolts"
"Start by doing what's necessary; then do what's possible; and suddenly you are doing the impossible."
Mitch's Auto Service ctr
Top

Bottom
Comment
1 comment

#3.1

DaWizard commented

11-26-2017, 11:40 AM

Editing a comment

Great news Mitch. Thanks for all you put into this place.

Top

Bottom

Previous template Next

Picture Posting

by Cape Codder

Can someone direct me to instructions for posting pictures?
- Channel: Model A Forum
10-04-2017, 05:08 PM
Posting U-tube videos

by Mitch

I put this in the Forum Support area sticky but figured it might help bringing it front and center.

When posting U-tube videos to the site it's best to use the "Enhanced Editor" then click the "Movie Link" next to the mountain image icon. Copy the "Share Link" (not the URL) of the video and paste it into the box then click ok.
This puts the video directly...
- Channel: Model A Forum
10-29-2017, 02:53 PM
Alternator in a Can, or How to fool the judges and run 12v.

by DaWizard

Original Thread:
https://www.vintagefordforum.com/for...es-and-run-12v

Since I have been boasting about my 12v neg system I was told I needed to do a pictorial and text of how and what I did to get my "Alternator in a Can" or "How to fool the judges and still run 12v". So, you asked for it, and yes,...
- Channel: Electrical Reference
11-10-2017, 03:35 PM
Alternator in a Can, or How to fool the judges and run 12v.

by DaWizard

Since I have been boasting about my 12v neg system I was told I needed to do a pictorial and text of how and what I did to get my "Alternator in a Can" or "How to fool the judges and still run 12v". So, you asked for it, and yes, I am going to get winded.

Disclaimer: There were NO working or rebuildable to working condition Powerhouse generators used in the making...
- Channel: Model A Forum
11-10-2017, 03:35 PM
Newly found forum help tips

by Mitch

since many of us are getting used to a new STYLE format, i think it might be a good idea to post newly found navigation tips to this main area for quick viewing. I will also be copying these threads to the support forum sticky where many are already posted...
if anyone notices something to share with the group that has not been posted feel free to start a new thread on it. Take a look at the...
- Channel: Model A Forum
06-05-2017, 07:56 AM
2 Tooth Steering Box Fixes, Adjustments & Worm Gear Install

by Mitch

installing a worm on a two tooth steering box shaft can prove to be a challenge. i usually tap the end of the steering shaft to 5/8 NC (no drilling necessary as the shafts accepts the tap as is) then use a 5/8-11 grade 8 bolt, flat and lock washer to press the worm on. i had to tap additional threads onto the shoulder of the bolt approx 1/2" to accommodate the nut. it works great and to pull...
- Channel: Chassis ~ Body Reference
05-31-2017, 09:05 AM
Gilmore Model A Day schedule of Events

by Mark Maron

Here is the schedule of events for the day....
You do not have permission to view this gallery.
This gallery has 1 photos.
- Channel: Model A Forum
08-14-2018, 05:17 PM
Building a 1930 pickup from parts.

by George Miller

...

http://pictures
- Channel: Miscellaneous Info
12-01-2017, 10:19 PM

DaWizard can use a Hand!

Announcement

PLEASE READ BEFORE POSTING YOUR EVENT

PLEASE READ BEFORE POSTING YOUR EVENT

Comment

Comment

Related Topics

Unconfigured Ad Widget