can anyone tell me which window regulator is front and which is for the back on my 36 sedan, they will inter change but Im not sure which goes where
-
You do not have permission to view this gallery.
This gallery has 1 photos. -
I'm not a guru but this link shows the quarter window regulator
3~ Tudor's & 1~ Coupe
Henry Ford said,
"It's all nuts and bolts"
"Start by doing what's necessary; then do what's possible; and suddenly you are doing the impossible."
Mitch's Auto Service ctr -
Last edited by ClaudeC; 02-21-2018, 08:47 PM.Comment
-
I have the 1933/34 restoration guide and find it great. There is information, diagrams and photos in these books that are not available anywhere else.You do not have permission to view this gallery.
This gallery has 1 photos.Last edited by ClaudeC; 02-22-2018, 03:54 PM.Comment
-
Thanks every body, Fred at Obsolete got me dialed in, hellava nice guy!Comment
-
Fred, has great info...Great stuff.. Many used parts on ebay are broken or defective..Fred checks out his parts so they are usable.Comment
-
Hey guys I'm getting to the point on my 36 of needing to install window regulators of which I have two complete sets, problem is they were all in a box when i bought the car and I didnt take apart myself so have no idea how to put back together, anyone no of an instructional book or video?01-17-2018, 10:27 AM -
I know the Cabriolet has a roll up window in the doors, does the window have a structural frame around it ? in other words when you roll down the window does it look exactly like a roadster or does the window frame stick out ?
thanks06-25-2018, 09:30 PM -
anyone recommend window seal , guide channel kits besides Vintique. Vintique are to thick and crap....04-20-2018, 07:38 AM -
I tried to search but no luck,
I am sending my doors out for paint and want to remove the glass and cranks and such. Must the glass be forced from the track at the bottom? the felt tracks side need to come out at the same time?
thanks07-08-2018, 04:06 PM -
On a 31 SW 4D TS, are there any garnishings that finish off the rear window?
Sorry guys. I found the metal frame.
Disregard this post.
Thanks,...02-24-2018, 01:57 PM -
On my 1930 coupe I find the drivers window very hard to raise. When restoring the car I replaced all the channels and glass in the doors and for some reason the passenger side window works well but the drivers side not so much. What can we try short of removing the upholstery panel to get inside the door?04-20-2018, 09:33 AM -
where can I buy replacement window regulators for my 26 model T Fordor? All but the left rear are bad.09-01-2018, 08:06 PM -
29 Fordor, front window can be pushed to lower and pulled up without using handle, works ok when using handle from inside, whats causing this? if window is lowered half way and you lean on it window sinks . springs weak ?04-20-2018, 06:34 AM
-
On this rainy afternoon, I figured I'd share a little album with 6 photos of a recent project on my '31 Tudor involving windows (gasket replacement and regulator replacement). Each picture has a description. Hope this is helpful!...You do not have permission to view this gallery.
This gallery has 6 photos.07-21-2018, 01:04 PM -
I broke the window on the first try, got my second one and trying to come up with a game plan, I have the rubber and it seems to be just a press fit, but pretty tight. I've taken a dye grinder and cleaned up the resting place this time and will soap it up good, am I missing anything?01-17-2018, 07:53 PM
Comment